StoneClean™ & Strip: Excellent Deep Cleaning Action that is Safe Even for Polished Marble!

StoneClean & Strip

Excellent Deep Cleaning Action that is Safe Even for Polished Marble!

 

Give  StoneClean™ & Strip a Try:

 

What makes tile and stone floors (and grout) so hard to clean? 

 

There are Several Reasons:

 

  • Using daily cleansers that can’t float the dirt/grime out of the more porous grout & tile and stone surfaces
  • using cleansers that contain detergents that resettle in lower grout joints and deposit some of the dirt with each cleaning the resulting “soap scum” created by cleansers containing Potassium or Sodium Salts. These environmentally unsound cleansers can create more problems than they solve.
  • Periodic waxing and build-up of wax residues in the grouting-typical waxes tend to trap and weld in dirt so the build-up only makes the problem worse
  • the past use of “grout sealers” that contain silicone – silicone based sealers can actually trap and weld in dirt/grease into silicone that are “free”(not bound to the grouting) Also some contain additives that over time whiten or create a haze that is difficult to remove
  • not using the proper equipment to clean with that can agitate into the joints
  • the past use of acidic grout cleaners that make the grouting more porous and easier to re-soil (acids don’t clean they etch).
  • What is needed then is proper / right cleaning chemistry to help both deep clean and to maintain the tile and stone & grouting.

 

 

Ideal for initial deep cleaning of stone, tile, grout, & concrete! WHY?

 

StoneClean™ & Strip contains a wide spectrum of surfactants that are geared for the widest range of contamination. How can it clean so well without harsh chemicals or without being acidic or high on the pH scale?

StoneClean™ & Strip uses a sophisticated formulation that is comprised of chemicals which create a three step cleaning process to “bite” the contamination and carry it off the surface

  • Two of the formulation chemicals, brought down to the surface of the stone/tile through the water solution by a “heavy” molecule ingredient, provides “bite” on oil based substances. (breaking surface tension with the heavy ingredient is key to letting the ingredients do their job)
  • The blend of surfactants takes the oils plus a total spectrum of contamination & brings them into solution with the water.
  • The surfactant-bound particles then tie in a packet or “micelle” with the ingredient added that then floats them away from the substrate. An additional chemical serves to keep the bound particles in solution so that they can be mopped away!

The exacting way in which these ingredients are blended together allows them to do the work in this three in one step cleaning action!!

 

The StoneClean™ & Strip Difference: No Residues

StoneClean Concentrates are crafted in an exacting way to avoid the common “pitfalls” of basic cleaning chemistry. They are able to accomplish a wide variety of cleaning tasks SAFELY without using caustic chemistry and without leaving cleaning RESIDUES.

StoneClean™ & Strip (pH of approx. 10) often removes coatings that high pH strippers can’t. Some strippers have a pH of 11 (1,000 times more alkaline) or higher.

The higher the alkalinity, the more care is needed to prevent damage to the surfaces! (Use of pH 11 or higher on polished marble is not recommended!)

 

SOAP & DETERGENT CHEMISTRY

Liquids have a property called surface tension. A thin razor blade floats in water because of high surface tension. Add a few drops of soap to the water and the razor blades instantly sinks to the bottom.

High surface tension inhibits the cleaning process. Reducing the surface tension increases the cleaning effectiveness. Surfactants (surface active agents) reduce surface tension. They make water “wetter.” Surfactants perform other tasks. They loosen and emulsify (dissolve into water) and suspend dirt and oils in solution to be rinsed away.

Surfactants are classified by their ionic (electrical charge) properties in water: anionic (negative charge), nonionic (no charge), cationic (positive charge) and amphoteric (either positive or negative charge). Most soaps are anionic.

 

StoneClean Concentrates are nonionic!. Proper / right cleaning chemistry will help to both deep clean and to maintain the tile and stone & grouting.

After Care with StoneClean™ “60” will prevent the floor from being heavily soiled again.

Please give StoneClean™ & Strip a try!

 

如果您会讲中文,并想了解更多有关获得这些优质产品的信息,请给我发一封电子邮件.
我可以阅读大多数简体字.
我会使用Google翻译
告诉我你更想了解哪种产品,我可以让你直接与我们公司联系,可以帮助你将产品寄到中国 谢谢

 

 

Purchasing StoneClean online or by phone

I now only can take orders via the phone or email. I have decided not to have sales via my site online due to issues with the program.

I wanted to let ones know that in case you prefer to order via the phone I can now accept credit cards over the phone! 

Thank You for Your Order in Advance!
My web site is secure thru PayPal. Google wants money to remove that notice and my web designer assures me it is secure. If any questions please email me at marbleshine57@yahoo.com please include your phone number and best time to call. I will return your email also with my phone number.

Thanks

Stan Zimmer

Marble Shine Services

ProductSlideImage_1

Stan

StoneClean™ & Strip Safe & Effective Deep Cleaning Action

OLYMPUS DIGITAL CAMERA
Excellent Deep Cleaning Grout and Tile

StoneClean™ & Strip Safe & Effective Deep Cleaning Action

Excellent Deep Cleaning Action that is Safe Even for Polished Marble!

 

Give StoneClean™ & Strip a Try:

 

What makes tile and stone floors (and grout) so hard to clean? 

 

There are Several Reasons:

 

  • Using daily cleansers that can’t float the dirt/grime out of the more porous grout & tile and stone surfaces
  • using cleansers that contain detergents that resettle in lower grout joints and deposit some of the dirt with each cleaning the resulting “soap scum” created by cleansers containing Potassium or Sodium Salts. These environmentally unsound cleansers can create more problems than they solve.
  • Periodic waxing and build-up of wax residues in the grouting-typical waxes tend to trap and weld in dirt so the build-up only makes the problem worse
  • the past use of “grout sealers” that contain silicone – silicone based sealers can actually trap and weld in dirt/grease into silicone that are “free”(not bound to the grouting) Also some contain additives that over time whiten or create a haze that is difficult to remove
  • not using the proper equipment to clean with that can agitate into the joints
  • the past use of acidic grout cleaners that make the grouting more porous and easier to re-soil (acids don’t clean they etch).
  • What is needed then is proper / right cleaning chemistry to help both deep clean and to maintain the tile and stone & grouting.  StoneClean™ & Strip uses a sophisticated formulation that is comprised of chemicals which create a three step cleaning process to “bite” the contamination and carry it off the surface
  • StoneClean™ & Strip contains a wide spectrum of surfactants that are geared for the widest range of contamination. How can it clean so well without harsh chemicals or without being acidic or high on the pH scale?
  • Ideal for initial deep cleaning of stone, tile, grout, & concrete! WHY?
  • Two of the formulation chemicals, brought down to the surface of the stone/tile through the water solution by a “heavy” molecule ingredient, provides “bite” on oil based substances. (breaking surface tension with the heavy ingredient is key to letting the ingredients do their job)
  • The blend of surfactants takes the oils plus a total spectrum of contamination & brings them into solution with the water.
  • The surfactant-bound particles then tie in a packet or “micelle” with the ingredient added that then floats them away from the substrate. An additional chemical serves to keep the bound particles in solution so that they can be mopped away!
  • The StoneClean™ & Strip Difference:
  • No Residues StoneClean™ & Strip (pH of approx. 10) often removes coatings that high pH strippers can’t. Some strippers have a pH of 11 (1,000 times more alkaline) or higher.   Liquids have a property called surface tension. A thin razor blade floats in water because of high surface tension. Add a few drops of soap to the water and the razor blades instantly sinks to the bottom. Surfactants are classified by their ionic (electrical charge) properties in water: anionic (negative charge), nonionic (no charge), cationic (positive charge) and amphoteric (either positive or negative charge). Most soaps are anionic. After Care with StoneClean™ “60” will prevent the floor from being heavily soiled again.
  • Please give StoneClean™ & Strip a try!
  • StoneClean Concentrates are nonionic!. Proper / right cleaning chemistry will help to both deep clean and to maintain the tile and stone & grouting.
  • High surface tension inhibits the cleaning process. Reducing the surface tension increases the cleaning effectiveness. Surfactants (surface active agents) reduce surface tension. They make water “wetter.” Surfactants perform other tasks. They loosen and emulsify (dissolve into water) and suspend dirt and oils in solution to be rinsed away.
  • SOAP & DETERGENT CHEMISTRY
  • The higher the alkalinity, the more care is needed to prevent damage to the surfaces! (Use of pH 11 or higher on polished marble is not recommended!)
  • StoneClean Concentrates are crafted in an exacting way to avoid the common “pitfalls” of basic cleaning chemistry. They are able to accomplish a wide variety of cleaning tasks SAFELY without using caustic chemistry and without leaving cleaning RESIDUES.
  • The exacting way in which these ingredients are blended together allows them to do the work in this three in one step cleaning action!!
  • Give this product a try!
  • Ordering is also  available by phone, as well as online thru this web site.  Call 503-362-5651 or email me at wellnesssalt@yahoo.com 

    Please give me your name and phone number so I can either call or email you back to get your credit card numbers. I am the only one who will contact you and get your numbers over a land line and thru a private / secure internet connection to complete the transaction. I use PayPal on my online ordering and it also is secure! 

 

 

 

 

 

Stone & Tile Cleaning Tips & Instructions

Stone & Tile Cleaning Tips & Instructions

 

Thank You for choosing the cleansers with the very best cleaning chemistry on the market – the StoneClean™ Concentrate cleansers from the Richard James Specialty Chemicals Company .

 

 

Basic “Deep” Cleaning Tips

    • When cleaning walls like shower walls always start wetting from the bottom going up as this will prevent any potential concerns of streaking
    • When Deep cleaning with StoneClean & Strip it is important never to let the solution dry on the surface without scrubbing and rinsing
    • Clean only areas small enough so you can control the area so as not to have any solution dry before scrubbing
    • For deep cleaning floor grout it is best to keep the floor area wet for at least 5 minutes before scrubbing with a nylon bristle brush
    • If the floor and grout are very dirty you may need to rinse with clean water and scrub again as StoneClean & Strip’s deep cleaning action will still work to bring up embedded dirt! You will likely be shocked to see how much dirt keeps coming up and out. (it drives me nuts to see how dirty many restaurant floors and bathrooms are!)
    • Dilutions: Severe Contamination 1 part solution to 3 parts water (on rare occasions such as embedded mold/mildew it may be necessary to use full strength) Average Soil   1 part solution to 10 parts water
  • Water Temperature Should be lukewarm and never hot! (excessive heat can separate the special surfactants in the product)
  • Microfiber cleaning cloths and sponges work best
  • Read the labels well on the bottles for further instructions
  • Best to use rubber gloves as it can tend to dry out the skin

Conc. Data Sheet

Ordering is also  available by phone, as well as online thru this web site.  Call 503-362-5651 or email me at wellnesssalt@yahoo.com 

Please give me your name and phone number so I can either call or email you back to get your credit card numbers. I am the only one who will contact you and get your numbers over a land line and thru a private / secure internet connection to complete the transaction. I use PayPal on my online ordering and it also is secure! 

 

 

 

Salt Free Cleaning Advantages

no saltmop & bucketclean looking floor

Salt Free Cleaning? I know processed salt is bad for my health and now your saying salt in the products I clean my floor with is bad too?

Consider: Salts are typically used to add extra activity to cleansers (as an extra “grabber”). Many neutral cleaners are not neutral in the bottle- but become neutral when the salts react out. This is when the products “die” or are no longer active in cleaning ability. StoneClean “104” StoneClean “60”, & StoneClean Hard Surface cleanser has NO SALTS and NO SOAPS! Not only are both neutral pH , but more importantly is that they are a continuously active product. Its activity does not stop when it is in dilution or on the floor! This trade secret formulation is why ones notice it cleans effectively even at a 1 to 128 dilution or even weaker.

Why Salt Free? Salt residues left in the floor can cause problems later. This is especially true when considering any surface treatment such as an impregnator , sealer, or wax. No sealer is truly totally impermeable! Over time there will be some up down and down up hydroscopic  (vapor movement). If salts are left in the substrate, continual “wetting” and resulting “activation” can eventually create a) efflorescence and or b) “color shift”. Extra salts can also hasten the process of re-soiling of the substrate.

Residue Free Cleans! Now the daily cleans go FASTER and more efficient with these three products. Also, there is better surface adhesion and bonding when further treating the floor after a deep cleaning. Using them as a final RINSE before applying any impregnator , sealer, or wax will produce better results. Also the substrate can be brought back to a neutral pH faster, where it should be to prevent damage.

Live in another country other than the United States, please email me concerning private labeling and purchasing arrangements.

Ordering is also  available by phone, as well as online thru this web site.  Call 503-362-5651 or email me at wellnesssalt@yahoo.com 

Please give me your name and phone number so I can either call or email you back to get your credit card numbers. I am the only one who will contact you and get your numbers over a land line and thru a private / secure internet connection to complete the transaction. I use PayPal on my online ordering and it also is secure!