StoneClean 104 is an exceptional cleanser. Not only the ability to break down even grease as a neutral pH cleanser, but also its ability to float to the surface what it breaks down!
The unique, proprietary surfactants, never die on the floor. This statement is unique to the cleaning industry. Always the active cleanser! 100% floor contact breaking down surface tension of the water itself to the floor and dirt/ grime makes this cleanser superior.
Years ago I gave a quart of “104” to the Tile Council of America president Bob Daniels. One day he called me up and first words were swear words. Whoa, I thought, what was up?
He had given the quart to the night janitorial staff to use on their new office flooring at Clemson university. They had a hard time cleaning off grout residue from the newly installed flooring. ” The floor looked like it should, brand new like the showroom tiles” They had tried several differnt cleaning products but to no avail till now.
That was the end of the story though. They wanted me to advertise in their magazine. I had no budget for advertising. A great product but no referrals from one who would have brought me tons of sales.
I am still representing the StoneClean line of cleansers and still do not advertise at all.
StoneClean & Strip can be used ,as the name implies , as a remover of coatings. The pH is between 10 & 11 which means it is alkaline in solution.
Alkaline ,but not too high pH to harm polished marble flooring! Sometimes a more aggressive approach to cleaning has to be made.
Suggestions for Usage:
- Start with a higher dilution to see what results you are getting. This means to try 1/10 dilution first. One part StoneClean & Strip to 10 parts cool to lukewarm water ( never hot).
- Adjust dilution to as high as 50/50 or 1/1
- Allow sufficient dwell time for floor to remain soaked. This will allow time for the special surfactants to break down the dirt, grime, coating. Allow at least 5 minutes to 15 minutes dwell time before scrubbing
- Care needs to be taken not to allow cleanser to dry into the floor. Work in manageable size areas to keep edges wet and not dry out.
- Scrub well and rinse well. You may find that you will see the water still dirty after tow or three rinses as it will continue to float up deeply embedded dirt!
- coatings not totally removed : allow the floor to dry completely before a second application. Check to see what the name of the coating or wax is called and find out if they made a stripper specific to the coating. I have run across coatings that cannot be totally removed! This makes it especially hard to get the grout joints clean as well
No two jobs deep cleaning will get same exact results so be aware of the challenges.
Good cleaning to you all
When my wife and would drive and stay in Hotels I would alsways bring a spray bottle of StoneClean & Strip. Most of the bathroom floors were not very clean! A quick spray and allow time to soak, then a good scrubbing would bring up and a lot of dirt, grime, and fungi.
Once while staying in Omaha , NE , I cleaned a bathroom floor in the room we were staying at. The visual effect was amazing. I found the Excutive housekeeper and mentioned I would be happy to do a sample clean. She called a housekeeper and had me go to a bathroom they have been working on to clean the floor. She said, ” we have worked hard on this floor, can you do anything?” I told her it should not be a problem.
Within 15 minutes the floor and grouting were much, much cleaner than before! She ,and all the maids and maintenance staff came to see. They also were shocked at how fast I cleaned the floor.
They ordered two cases of StoneClean & Strip!
Not every floor cleaning project will have the same desired results. Not all come as clean the first time. The assurance is that it likely will be much better than any previous efforts!
Give StoneClean & Strip a try.
StoneClean & Strip is a super effective deep cleaning agent for most all floor types. Safe for polished marble grout cleaning.
One client of mine used StoneClean & Strip to clean a concrete floor in a shop. They throughly wetted the floor and while they were waiting and getting ready to scrub the floor they noticed something: oils from the floor were floating to the top of the water! StoneClean & Strip had started the cleaning action before they had a chance to scrub the floor!
Other stories to come as well about this amazing cleanser.
All StoneClean Concentrates are exceptional and grabbing the dirt and grime and then floating it to the top to be mopped away.
My first time using StoneClean 104 was deep cleaning a Saltillo tile floor that had not seen a mop and bucket for years. I was shocked to see how where I mopped the floor came clean where I rinsed.
The homeowner was shocked as well and then ordered six gallons. They probably still have product left!
One homeowner in Kansas City commented that her grout was coming cleaner with each cleaning without scrubbing. The surfactant based cleaning chemistry puts the cleaning solution into full contact with the floor allowing it to work deeply better than any other product I am aware of today.
I will comment on StoneClean & Strip tomorrow.
Most ,who use StoneClean 60 , are unaware of how effective it is to clean wood floors. Since there are no detergents to leave any residues it make the floor look and feel cleaner longer than most products.
I had one client in DesMoines Iowa who loved it since it made their clubhouse floor less slippery when wet. Slip fall issues are lessened when a cleanser leaves no residue behind.
Since StoneClean 60 is near neutral pH it will do no harm to floor finishes. Give it a try you will like what you see and feel.